Our Products – Grid Layout
Turbine snow thrower
The turbine snow thrower is perfect for clearing snow, whether dry, wet or frozen, on any surface.
Available cutting width: 60 and 70 cm.
Thanks to its impellers and its duct which can be pivoted by 180° directly from the operator's seat, snow is removed and thrown over 10 metres.
Adjustable skids allow you to adjust the height of the turbine snow thrower to prevent gravel or stones from being collected and launched during snow removal. Safety pins also prevent damage to impellers in case of impact.
Should it be necessary to improve the balancing of the machine at work, a ballast is available, which can be applied to the attachment.
DTECHNICAL FEATURES
- Working width: 60 - 70 cm
- Minimum power required*: 6.3 kW
- Transmission: with gears in oil bath and cast iron housing
- Duct: made of stainless steel and pivoting by 180° directly from the operator's seat
- Adjustable skids to set the ground clearance
- Safety pins to prevent damage to the impellers in case of impact
- Optional: balancing ballast
DIMENSIONS AND WEIGHTS
- Turbine snow thrower 60 cm: Width 606 mm - Weight 44 kg
- Turbine snow thrower 70 cm: Width 706 mm - Weight 45 kg
Snow blade
The 100-cm snow blade is perfect for removing snow from any surface.
Made of steel, it features a curved shape to facilitate the rolling of the snow without it sticking to the blade and can be orientated laterally directly from the operator's seat.
Spacer rings on rear feet allow you to adjust the ground clearance of the snow blade to prevent gravel and other material from being collected during snow removal.
The blade can be used to handle gravel or sand.
Should it be necessary to improve the balancing of the machine at work, an optional 9 kg ballast is available, which can be applied to the attachment.
DIMENSIONS AND WEIGHTS
Width 1000 mm - Weight 61 kg
RollerBlade
The single-rotor heavy duty mower with mobile blades, RollerBlade, is available with cutting width of 75 and 90 cm and it is the ideal attachment for clearing or heavy duty maintenance of uncultivated land, forest undergrowth and rural parks, or also for eliminating pruning residues or for controlling weeds between rows.
Featuring transmission with gears in oil bath, and a solid steel structure which ensures durability over time, the single cutting rotor is mounted on bearings that can easily withstand even the toughest stresses.
The Y-blades pulverise brambles, wood coppice, underbrush, vines, etc., distributing them uniformly along the entire cutting width. Optionally, it is possible to assemble lawn mower blades so as to use the RollerBlade as a rural lawn mower.
Cutting height can be adjusted easily and continuously, from 1.2 to 5.5 cm (in standard configuration), through a single crank.
The standard outfit of RollerBlade includes the rear anti-scalp roller, while the wide front opening, protected by sturdy steel flaps, makes the flow of material to be chopped easier.
TECHNICAL FEATURES
- Single-rotor heavy duty mower with mobile Y-blades
- Working width: 75 - 90 cm
- Minimum power required*: 6 kW (75 cm) - 7.5 kW (90 cm)
- Automatic blade brake according to EN 12733 standard and anti-dragging free wheel
- Transmission: main transmission with gears in oil bath and lateral transmission with belts
- Front opening: protected by mobile steel flaps
- Rear anti-scalp roller: standard outfit
- Cutting height: adjustable from 1.2 to 5.5 cm (standard outfit)
- Optional: lawn mowing blade kit
DIMENSIONS AND WEIGHTS
- RollerBlade 75 cm: Width 885 mm - Weight 97 kg
- RollerBlade 90 cm: Width 1050 mm - Weight 104 kg
BladeRunner
The single-rotor heavy duty mower with mobile blades, BladeRunner, is the ideal attachment for the heavy duty maintenance of uncultivated land, forest undergrowth and rural parks, or also for eliminating pruning residues or for controlling weeds between rows.
Available cutting widths: 60, 75, 90 and 110 cm.
Featuring transmission with gears in oil bath, and a solid steel structure which ensures durability over time, the single cutting rotor is mounted on bearings that can easily withstand even the toughest stresses.
The Y-blades pulverise brambles, wood coppice, underbrush, vines, etc., distributing them uniformly along the entire cutting width. Optionally, it is possible to assemble lawn mower blades so as to use the BladeRunner as a rural lawn mower.
Front wheels make steering easier and pivot to prevent its use; for 90 and 110 cm models they can be locked for easier operation on slopes.
Cutting height can be adjusted easily and continuously, from 2 to 7.5 cm, through a single crank. Excluding the front gauge wheels and installing the rear anti-scalp roller (available upon demand), the cutting height can decrease to 0.5 cm.
Should it be necessary to improve the balancing of the machine at work, an optional 14 kg ballast is available, which can be applied to the attachment.
TECHNICAL FEATURES
- Single-rotor heavy duty mower with mobile Y-blades
- Working width: 60 - 75 - 90 - 110 cm
- Minimum power required*: 5 kW (60 cm) - 6 kW (75 cm) - 7.5 kW (90 cm) - 9.5 kW (110 cm)
- Automatic blade brake according to EN 12733 standard and anti-dragging free wheel
- Transmission: main transmission with gears in oil bath and lateral transmission with belts
- Front opening: mobile with canvas and protection bar
- Front pivoting wheels: they can be locked for processing on slopes (for 90 and 110 cm models only)
- Cutting height: adjustable from 2.7 to 7.5 cm (standard outfit). It can be decreased to 0.5 cm excluding front wheels and installing the rear anti-scalp roller
- Optional: lawn mowing blade kit, rear anti-scalp roller, 14-kg ballast
DIMENSIONS AND WEIGHTS
- BladeRunner 60 cm: Width 800 mm - Weight 78 kg
- BladeRunner 75 cm: Width 965 mm - Weight 86 kg
- BladeRunner 90 cm: Width 1130 mm - Weight 96 kg
- BladeRunner 110 cm: Width 1295 mm - Weight 104 kg
Heavy duty mower
The 80-cm single-blade heavy duty mower is perfect for quick maintenance on rough grounds, undergrowth, industrial or uncultivated areas or for fast maintenance of green areas without any grass catching.
The sharp blade cuts and chops grass, wood coppice and underbrush, depositing them on the ground with a regular spread pattern, thanks to the new rear divider for easier discharge on ground.
Featuring transmission with gears in oil bath, and a solid steel structure which ensures durability over time, the heavy duty mower has a swinging axle to follow the contour of the ground and front, pivoting wheels to prevent its use and favour manoeuvrability.
The cutting height is adjustable through suitable spacers.
TECHNICAL FEATURES
- Single-blade heavy duty mower
- Working width: 80 cm
- Minimum power required*: 7 kW
- Automatic blade brake according to EN 12733 standard and anti-dragging free wheel
- Transmission: with gears in oil bath
- Swinging axle
- Front pivoting wheels: they can be adjusted on the forks for the horizontal setting of the cutting mechanism
- Cutting height: adjustable through suitable spacers to be positioned on the cutting blade
DIMENSIONS AND WEIGHTS
Width 820 mm - Weight 70 kg
Lawn mower
The lawn mower is the ideal implement for mowing lawns in green areas, public and private parks, gardens and sports grounds.
The following versions are available: 56 cm single-blade or 100 cm with two blades. Both can be used either with a grass catcher or side discharge without collection.
They are equipped with oil-bath gears and a sturdy steel structure ensuring a long life over time. Front wheels favour manoeuvrability.
The cutting height is adjustable easily and quickly through the dedicated lever.
The 100-cm lawn mower has two pivoting blades installed on blade-holder discs to reduce damage in case of shocks against stones, tree stumps and other hard surfaces as far as possible.
TECHNICAL FEATURES
- Cutting width: 56 cm (single blade) - 100 cm (with two blades)
- Minimum power required*: 3.6 kW (56-cm single-blade lawn mower. For balancing purposes, the installation on machines having a diesel engine is not recommended) - 7.5 kW (100-cm two blades lawn mower)
- Transmission: with gears in oil bath
- Anti-dragging free wheel (for 100-cm two blades lawn mower only) and automatic blade brake, according to EN 12733 standard
- Blade-holder discs developed to reduce as far as possible damage due to the light shocks, thanks to pivoting blades (for 100-cm two blades lawn mower only)
- Adjustable front wheels on forks for the horizontal adjustment of the cutting mechanism (for 100-cm two blades lawn mower only)
- Cutting height: the blade to ground clearance can be adjusted through a suitable lever. Depending on the position of front wheels, the following cutting heights can be obtained: from 5 to 8 cm - from 7.5 to 10.5 cm - from 10 to 13 cm (for 100-cm two blades lawn mower only)
- Grass catcher: capacity 60 l (56-cm single-blade lawn mower) - 160 l (for 100-cm two-blades lawn mower)
DIMENSIONS AND WEIGHTS
- 56-cm single-blade lawn mower: Width 640 mm - Weight 32 kg
- 100-cm two blades lawn mower: Width 1020 mm - Weight 91 kg
Cutter bar
The cutter bar is the specific implement for cutting grass and forage.
It comes in many width values: from 80 to 210 cm. Its cutting units have different features to always get the best result in terms of different kinds of grass to be cut: "Laser®" cutter bars with standard blade-holder, cutter bars with middle cut fingers or cutter bars with double alternate movement, "Duplex" or "Dual Laser Elasto" type.
All the cutter bars are standard supplied with slides for cutting height adjustment.
The transmissions, which support and drive the cutter bars, are "Torx", maintenance-free, oil-bath ones; they are also available with double movement for "Duplex" and "Dual Laser Elasto" cutter bars.
Should it be necessary to improve the balancing of the machine at work, an optional 12 kg weight is available, which can be applied to the transmission in oil bath "Torx".
VERSIONS:
- "Laser®" cutter bars
Available cutting widths: 80, 100, 115, 135 and 155 cm. These anti-clogging bars are recommended for tough and fine grass typical of mountain sides or manicured lawns. The perfect "scissor cut" is guaranteed by high quality materials.
They are used on all kinds of ground where no swath is required.
- Cutter bars with middle cut fingers
Available cutting widths: 115 and 145 cm. This cutter bars have the traditional fingers with upper tab to support the rod to be cut. Suggested for cutting general grass and for haymaking with formation of swath due to two conveyors.
Their use is suitable on land where swath is appropriate.
- "Duplex" cutter bars
Available cutting widths: 120, 150 and 180 cm. These cutter bars have a double alternate movement (the blade and the teeth array move in a counterposed way) equipped with traditional fingers with upper tab (to support the rod to be cut) and self-adjusting blade-holders which assure constant pressure without any manual operation by the operator.
Efficient and effective in every working condition, they never clog and offer a high quality cut even at high speed.
- "Dual Laser Elasto" cutter bars
Available cutting width: 130, 170 and 210 cm. These cutter bars have a double alternate movement (blade and teeth array moving counter to each other) and are equipped with the "Laser®" tooth and self-adjusting blade-holders which maintain constant force between the blade and the teeth array, without any manual operation by the operator.
The new "Dual Laser Elasto" cutter bars keep all the structural features and the cutting quality of "Laser®" bars, with the advantage of full operating comfort thanks to the very low level of vibrations.
560 HY WS PowerSafe
Motor mower with hydrostatic drive and assisted hydraulically controlled steering
For those who need to work in “no-limits” conditions and on steep slopes, Ferrari introduces the new 560 HY WS PowerSafe motor mower with hydrostatic drive and assisted hydraulically controlled steering system.
The 560 HY WS PowerSafe is the only hydrostatic motor mower in the world to be equipped with a patented PowerSafe hydraulic clutch with multiple steel discs in oil bath and connected directly to the engine.
The ergonomics of the easily operated levers together with the high drive and braking capability ensure easy manoeuvrability and a total and safe control of the unit, even in the toughest conditions.
The Ferrari 560 HY WS PowerSafe motor mower has 2 speed ranges (slow/fast) selected by the operator with a mechanical control situated on the handlebars, an automatic parking brake with manual release mechanism for forced manoeuvres.
The engines fitted include a Honda GX390 Alps 11.7 HP petrol engine, a Briggs&Stratton Vanguard 16 HP two-cylinder petrol engine and a Yanmar LN100 10 HP diesel engine prepared for use on steep slopes.
The versatility of the machine is guaranteed by an unlimited series of attachments, such as: cutter bars, heavy-duty mowers, lawn mowers and generally speaking all the attachments used for alpine haymaking and for uses in municipalities.